American Journal of Scientific Research and Essays


Wind power cabin high temperature hot spot remote intelligent monitoring and early warning system

Review article of American Journal of Scientific Research and Essays Wind power cabin high temperature hot spot remote intelligent monitoring and early warning system Xiaoxiao Chen College of Ocean Science and Engineering, Shanghai Maritime University, Shanghai 201306, China With the increasing energy crisis, the development and utilization of wind energy, which is a substitute for traditional energy sources and has renewable and cleanliness, has gradually attracted the attention of people all over the world. While the wind power industry is growing rapidly and the unit capacity of the unit is gradually increasing, the operational safety of wind power equipment is receiving more and more attention. If the wind turbine component fails, the small one will result in downtime maintenance, and the other will cause the machine to be destroyed. Because the wind farm is built in remote areas or offshore areas far away from the city, the traffic is inconvenient, and the wind turbines are at high altitude, so it is very difficult to maintain the unit. Once a fault or fire occurs, it is difficult to rescue in time. Let it develop its accident. In view of the high cost of detection, the failure of detecting faults, and the high proportion of missed faults, the on-line monitoring of the operating status of wind power equipment, the real-time diagnosis of early warning faults, and the maintenance of equipment are also important. The online monitoring system is applied to the health monitoring of wind power equipment, which not only can alert the equipment to potential failures, avoid the occurrence of major accidents, but also can determine the fault type and severity of the equipment based on the integration of existing analytical methods. Save on operational maintenance and repair costs. At a deeper level, mining and analyzing the monitoring data can also ...

Translating the Gains of Nursing Education Reforms into Quality Clinical Practice: The Role of Nursing Leaders

Research article of American Journal of Scientific Research and Essays Translating the Gains of Nursing Education Reforms into Quality Clinical Practice: The Role of Nursing Leaders Bridget Omowumi Akin-Otiko1, Margaret Moyosola Oladapo2, Mary Idowu Edward3 1Department of Maternal Neonatal & Child Health Nursing; 2Department of Community Health Nursing; 3Department of Adult Health Nursing, Faculty of Nursing Science,University of Medical Sciences, Ondo-City, Ondo State, Nigeria Nursing reforms in Nigeria took a quantum leap in 2018 with the alignment of nursing education with the mainstream of tertiary education in the country. Year 2023 has been scheduled for full implementation of the reform. The ultimate goal of reforms in nursing education is delivery of quality nursing care. This review was undertaken to highlight the critical roles of nursing leaders in Nigeria towards ensuring that the reforms in nursing education translate to quality nursing practice. The six critical roles discussed in the paper are expected to stimulate necessary activities towards maximizing the gains of nursing education reforms in the interest of the citizens. Keywords: Gains, Reforms, Nursing education, Nursing leaders, Nigeria ...

On the climate adaptability design of hot summer and cold winter regions-Taking the design works of Huzhai Sanjia Kindergarten in Lancao County as an example

Research article of American Journal of Scientific Research and Essays On the climate adaptability design of hot summer and cold winter regions-Taking the design works of Huzhai Sanjia Kindergarten in Lancao County as an example Ye Wu1*, Xiao Shao2, Guozhu Chen3 1College of Civil Engineering & Architecture, China Three Gorges University, Yichang, 443002, China. 2College of Medicine, China Three Gorges University, Yichang, 443002, China. 3College of Hydraulic & Environmental Engineering, China Three Gorges University, Yichang, 44300 2, China. This article takes the example of the 8th China Dream Township-Product Creative Design Competition in 2019, the three-parent kindergarten in Huzhai Village, Lankao County, Kaifeng City as an example. According to the local climate characteristics, architectural forms, building materials and other aspects combined with ecological design means to create a suitable summer. Green kindergartens with climatic conditions in hot winter cold regions. The design mainly starts with the contradiction between kindergarten use and regional climate. Through the optimization design of environment design, layout optimization, lighting and ventilation optimization and material adoption, an ecological design method is proposed for rural kindergartens in hot summer and cold winter regions. Keywords: Hot summer and cold winter area; Kindergarten; Climate; Ecology ...

Simulation calculation and research of double layer metal rubber vibration isolator

Research article of American Journal of Scientific Research and Essays Simulation calculation and research of double layer metal rubber vibration isolator Shengzhe Jin, Guohe Jiang, Gang Wu, Biwen Chen, Xiangyi Zou Merchant Marine College, Shanghai Maritime University, Shanghai, 201306, China Marine diesel units will produce certain vibration and noise at work, which will affect the normal operation of machinery and crew’s physical and mental health. It is a common solution to equip diesel units with vibration isolators, so it is very necessary to optimize the design of vibration isolators. Based on diesel engine set with double layer metal rubber vibration isolator, for example, to establish the geometric model of the vibration isolator with Solidworks, and importing it into the finite element software called ANSYS Workbench to make simulation calculation, get the vibration isolator in forward loading, reverse load and radial load displacement nephogram under three working conditions and stress nephogram, get the maximum double metal rubber vibration isolator deformation, the maximum stress value and the location of maximum stress. The results show that the maximum stress of the double layer metal rubber isolator is less than the yield limit of the material, which meets the work requirements. The stress concentration is easy to occur in the center of the bottom base of the vibration isolator, that is, fatigue failure is easy to occur. Under the condition of radial loading, the maximum deformation of the case is large. The maximum deformation and stress of the improved case are significantly reduced, which is of guiding significance to the optimal design of the vibration isolator. Keywords: Double layer metal rubber vibration isolator; Finite element; ANSYS; Stress concentration; Optimization design ...

Prof. Dr. Mohammad Mehdi Rashidi
Shanghai Key Lab of Vehicle Aerodynamics and Vehicle Thermal Management, Systems, Tongji Clean Energy Institute of advanced studies- Tongji University.

Dr. Milena Palczewska
Vice Dean for student affairs, Military Faculty, War Studies University, al. gen. Antoniego Chruściela “Montera” 10300-910 Warszawa

Dr. Piyush Chaudhary
Assistant Professor, Deptt of Ras Shastra (Ayurvedic Pharmaceutics), Incharge, Gurukul Pharmacy, MSM Institute of Ayurveda, BPS Women University, Khanpur Kalan, Sonepat, Haryana

Dr. M. M. Awad
Mechanical Power Engineering Department, Faculty of Engineering, Mansoura University, Mansoura, Egypt

Dr.Eng. Ahmed Kadhim Hussein
College of Engineering, Department of Mechanical Engineering, Babylon University, Babylon City, HIILA , IRAQ

Dr. KATSURA Hidemitsu 
Guest Lecturer for ICEEE-2016, Coimbatore Institute of Technology (CIT) in COIMBATORE, TAMIL NADU 641014, INDIA

Dr. Sang-Bing Tsai
Prof., School of Business, Dalian University of Technology, Panjin, 124221, China; Prof., Zhongshan Institute, University of Electronic Science and Technology of China; Prof., TEDA College, Nankai University, China

Dr. Deepmala 
Visiting Scientist, SQC & OR Unit, Indian Statistical Institute

Dr. Begum Sertyesilisik
Assoc. Prof. at the Istanbul Technical University

Dr. Palani Elumalai
National Research Foundation Fellow of Korea, Department of Chemistry & Biology, University of Ulsan

Dr. Shittu Lukeman Adelaja Joseph
HOUSTON, TX. 77099, USA

Prof. Dr. Naqib Ullah Khan
Department of Plant Breeding and Genetics, The University of Agriculture, Peshawar 25130, Khyber Pakhtunkhwa, PAKISTAN.

Dr. V. Ananthaswamy
Assistant Professor, The Madura College (Autonomous), Madurai – 625 011, Tamil Nadu, India.

Prof. Dr. M.Nageeb Rashed
Professor of Analytical and Environmental Chemistry, Faculty of Science, Aswan University, Egypt

Dr. Hossein Kazemian
Faculty& Director; Northern Analytical Lab Services (NALS), University of Northern British Columbia (UNBC), 3333 University Way, Prince George, BC, Canada, V2N 4Z9

Dr. Vishnu Narayan Mishra
Applied Mathematics and Humanities Department, Sardar Vallabhbhai National Institute of Technology.

Dr. Balaram Kundu
Associate Professor, Department of Mechanical Engineering, Jadavpur University, Kolkata – 700 032, INDIA

Dr. Sergio Nardini
Associate Professor, Dipartimento di Ingegneria Industriale e dell’Informazione, Seconda Università degli Studi di Napoli, via Roma 29, 81031 Aversa (CE)

Dr. Sanjay Mishra
Professor, Department of Biotechnology, School of Engineering & Technology, IFTM University

Dr. Lakshmi Narayan Mishra
Professor, Department of Mathematics, National Institute of Technology

Dr. DHANANJAYA REDDY
Dept.of Mathematics, Assistant Professor In Mathematics, Govt. Degree & PG College

Dr. S. Krishna Murthy
Associate Professor, Department of Applied Mathematics,Defence Institute of Advanced Technology, Deemed University(DU), Girinagar, Pune

Manuscript Title: The title should be a brief phrase.

Author Information: List full names and affiliation of all authors, including Emails and phone numbers of corresponding author.

Abstract: The abstract should be less than 500 words. Following abstract, a list of keywords and abbreviations should be added. The keywords should be no more than 10. Abbreviation are only used for non standard and long terms.

Introduction: The introduction should included a clear statement of current problems.

Materials and Methods: This section should be clearly described.

Results and discussion: Authors may put results and discussion into a single section or show them separately.

Acknowledgement: This section includes a brief acknowledgment of people, grant details, funds

References: References should be listed in a numbered citation order at the end of the manuscript. DOIs and links to referenced articles should be added if available. Abstracts and talks for conferences or papers not yet accepted should not be cited. Examples Published Papers: 

1. Shuo Zhang. Experimental study on scouring of coarse sand and fine sand seabed caused by propeller washing in front of solid wharf.American Journal of Scientific Research and Essays, 2018 3:14. DOI:10.28933/ajsre-2018-12-1805 
2.Zhang Bo and Xie Xionggang. Numerical simulation and analysis of coupled Thermal-Hydrological-Mechanical in coalbed methane heating mining. American Journal of Scientific Research and Essays, 2018 3:13. DOI:10.28933/ajsre-2018-12-0808 

Tables and figures: Tables should be used at a minimum with a short descriptive title. The preferred file formats for Figures/Graphics are GIF, TIFF, JPEG or PowerPoint.

Proofreading and Publication: A proof will be sent to the corresponding author before publication. Authors should carefully read the proof to avoid any errors and return the proof to the editorial office. Editorial office will publish the article shortly and send a notice to authors with the links of the paper.

Open Access
American Journal of Scientific Research and Essays is a peer reviewed open access journal publishing research manuscripts, review articles, editorials, letters to the editor in Scientific Research (Indexing details).

Peer Review
To ensure the quality of the publications, all submitted manuscripts will be peer-reviewed by invited experts in the field. The decisions of editors will be made based on the comments of the reviewers.

Rapid Publication
Time to first decision: within 2 days for initial decision without review, 18 days with review; Time to publication: Accepted articles will be published online within 2 days, and final corrected versions by authors will be accessible within 5 days.  More details....

Rapid Response Team
Please feel free to contact our rapid response team if you have any questions. Our customer representative will answer your questions shortly.

American Journal of Scientific Research and Essays1

Loading